Bosch DS7200V2-EXP Guia do Utilizador descarregar pdf (Página 85)

DS7200V2-EXP | Expert Programming Guide | 4. Control Panel Programming EN | 85

Bosch Security Systems | 8/04 | 4998153891C

Location ##, Area

• Address: See Table 13 on page 80

• Default: 1 (Area 1)

• Selections:

− 0 = No Area Assigned (Disabled)

− 1 = Assign Location ## to Area 1

− 2 = Assign Location ## to Area 2

− 3 = Assign Location ## to Area 3 (DS7240V2 only)

− 4 = Assign Location ## to Area 4 (DS7240V2 only)

This parameter assigns an area to a location. Each location can only be assigned to one area.

Location ##, Zone Number

• Address: See Table 13 on page 80

• Default: See Table 13 on page 80

• Selections: 0,1 to 4,0

This parameter determines the zone number that appears on keypad displays, the control panel event log and at

the optional printer. This is also the zone number reported to the ARC.

This parameter can be used to create a Zone 1 for each Area.

1 2 ... 80 81 82 83 84 85 86 87 88 89 90 ... 155 156

Sem comentários

Bosch DS7200V2-EXP Guia do Utilizador Página 85