Bosch DS7200V2-EXP Guia do Utilizador descarregar pdf (Página 36)

DS7200V2-EXP | Expert Programming Guide | 4. Control Panel Programming EN | 36

Bosch Security Systems | 8/04 | 4998153891C

Local Programming Options

• Address: 0257

• Default: 12

• Selections: 0, 1, 4, 5, 8, 9, 12, 13

Enter This Data Digit to Select Options

Local Programming Options 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

No Options Selected

•

Enable Installer Mode Reports

•

• • •

Reserved

Keypad Programming Enabled

• • • •

PK32 (Programming Key) Enabled

• • • •

• Enable Installer Mode Reports: If this option is enabled, the control panel sends the following events:

Installer Mode Start {82}, Installer Mode End {83}, and Parameters Changed {98}. If this option is disabled,

these events are only entered in the control panel’s history log.

• Keypad Programming Enabled: If this option is enabled, all control panel parameters can be programmed

from any system text keypad or an Installer Keypad. See “Installer Keypad” and “Installer Mode” in the

DS7200V2 Installer’s Guide (P/N: 4998153893).

• PK32 (Programming Key) Enabled: If this option is enabled, the PK32 Programming Key can send or

receive a program record (the control panel’s parameter settings). See “Programming Key (PK32)” in the

DS7200V2 Installer’s Guide (P/N: 4998153893).

If the “Keypad Programming Enabled” and the “PK32 (Programming Key) Enabled” options are both

disabled, you cannot access the control panel’s programming mode from a keypad. You can still

program the control panel from RPS.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 155 156

Sem comentários

Bosch DS7200V2-EXP Guia do Utilizador Página 36