Bosch DS7200V2-EXP Guia do Utilizador descarregar pdf (Página 70)

DS7200V2-EXP | Expert Programming Guide | 4. Control Panel Programming EN | 70

Bosch Security Systems | 8/04 | 4998153891C

Keypad Response Options

• Address: 0704

• Default: 0

• Selections: 0 to 3, 6 to 11, 14, 15

Enter This Data Digit to Select Options

Keypad Response Options 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

No Keypad Response Options

•

Enable Keypad Tamper Response

• •

• • • •

Enable Extinguish Mode

• •

• • • • • •

Extinguish Mode Displays Date

• • • •

Restrict Installer PIN

• • • • • •

This is a global parameter that affects all keypads.

• Enable Keypad Tamper Response: If this option is enabled, the control panel checks for a keypad tamper

response from each keypad. If this option is disabled, the control panel ignores the keypad tamper response.

To use this option, enable it at the control panel by setting Address 0704 to “1,” and enable the

keypad’s tamper jumper pins. See the installation instructions accompanying the keypad for information.

• Enable Extinguish Mode: If this option is enabled, the keypads extinguish when there is no activity. The

Power LED is always on, but any other LEDs are blank. The text keypad display also goes blank. Entering a

PIN turns the LEDs on and causes the text keypads to display text. If this option is disabled, the keypads are

never extinguished.

• Extinguish Mode Displays Date: If this option is enabled, when the keypad’s display is extinguished, the

text keypad's display shows the date and time on the first line, and the Call for Service Text (see page 26) on

the second line. If this option is disabled, the text keypad's display is blank.

You must select the “Enable Extinguish Mode" option in order to use the "Extinguish Mode Displays

Date” option.

• Restrict Installer PIN: If this option is enabled, the Installer’s PIN is restricted. The user must press [#][9][2]

to enable the Installer PIN. Once the Installer PIN is enabled, the installer may enter his PIN and access the

installer functions. If this option is disabled, the Installer’s PIN is always operative, and the Installer PIN can

clear Extinguish Mode.

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 155 156

Sem comentários

Bosch DS7200V2-EXP Guia do Utilizador Página 70