Bosch DS7200V2-EXP Guia do Utilizador descarregar pdf (Página 106)

DS7200V2-EXP | Expert Programming Guide | 4. Control Panel Programming EN | 106

Bosch Security Systems | 8/04 | 4998153891C

Alarm Event Abort Window

• Address: 1034

• Default: 3 (45

sec)

• Selections:

− 0 to 1 = 15 sec

− 2 = 30 sec

− 3 to 15 = 45 sec

This parameter sets the length of time that a user has to enter a valid PIN and cancel an alarm before an alarm

report is sent.

If a user acknowledges a non-fire alarm event by entering their PIN before the Alarm Event Abort Window

expires, the following events occur:

1. The alarm event is aborted. Alarm, Cancel and Restoral reports associated with the alarm are not

transmitted. The alarm event becomes a local only event.

2. The user hears a unique three long beep tone at the keypad.

3. The text keypad indicates the aborted alarm on the display. The LED keypad indicates the aborted alarm

with a slow flash in Alarm Memory.

See Cancel Event Enabled on page 26 and the “Enable Alarm Event Abort” option in Options 1 for Zone Function

Types 0 to 2, 5 to 8, 11 to 15 on page 95 for more information.

This parameter only affects non-fire zones. Fire and Fire with Verification zones are not affected by

enabling this parameter.

Zone Trouble/Restoral from Trouble Report Routing

• Address: 1038

• Default: 1 (Reports to Destination 1, Events to Log/Printer)

• Selections:

− 0 = No Reports, no Events to Log/Printer

− 1 = Reports to Destination 1, Events to Log/Printer

− 2 = Reports to Destination 2, Events to Log/Printer

− 3 = Reports to Destinations 1 & 2, Events to Log/Printer

− 4 = Reports to Destination 2 only on Destination 1 Comm Fail Event, Events to Log/Printer

− 5 = No reports, Events to Log/Printer

Zone Trouble report events include the following:

• RF Low Battery {121}

• RF Tamper Trouble {121}

• Trouble Events {139 to 145}

Restoral from Trouble report events include Restoral from Trouble events {146 – 152}.

See “Communication Failure (Comm Fail)” for a description of the Comm Fail event and “Dialing Attempt

Tables” for dialing sequence in the DS7200V2 Installer’s Guide (P/N: 4998153893).

Enable reporting at the Global Reporting Options parameter (see Global Reporting Options on page

19), and enter at least one phone number (or IP address) for one routing destination (see Phone

Number 1 (2) for Destination 1 (2) on page 9).

1 2 ... 101 102 103 104 105 106 107 108 109 110 111 ... 155 156

Comentários a estes Manuais

Sem comentários

Bosch DS7200V2-EXP Guia do Utilizador Página 106

Comentários a estes Manuais

Manuais e produtos relacionados com Sistemas de segurança - controlo de acesso Bosch DS7200V2-EXP