Bosch DS7200V2-EXP Guia do Utilizador descarregar pdf (Página 78)

DS7200V2-EXP | Expert Programming Guide | 4. Control Panel Programming EN | 78

Bosch Security Systems | 8/04 | 4998153891C

4.4.8 RF Keyfobs

RF keyfobs (two- and four-button keychain keypads) are managed internally by the control panel. Keyfobs are

assigned to PINs (users) by entering IDs. No other programming parameters are required. Keyfobs generally

follow the authority level and area assignment for the PIN they are assigned to.

RF keyfobs report low battery conditions using the user number (1 to 32). The user’s ID number, not the

transmitter number, is used for open/close reports. Each receiver can handle 24 keyfobs. For 32 keyfobs, two RF

Receivers are required. Address 2938 must be set to a value from 1 to 14.

To add an RF keyfob into the system, see “Adding RF ID Codes” in the DS7200V2 Installer’s Guide

(P/N: 4998153893).

RF Keyfob Receiver Assignment Options

• Address: 2938

• Default: 8

• Selections: 1 to 14

Enter This Data Digit to Select Options

RF Keyfob Receiver Assignment Options 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

No Options Selected (all RF on RF Receiver 1)

Assign Keyfobs 1-8 to RF Receiver 2

• • • • • • •

Assign Keyfobs 9-16 to RF Receiver 2

• • • • • • •

Assign Keyfobs 17-24 to RF Receiver 2

• • • • • • •

Assign Keyfobs 25-32 to RF Receiver 2

• • • • • • •

This parameter assigns keyfobs in groups of eight to RF Receiver 2. Keyfobs not assigned to RF Receiver 2 are

automatically assigned to RF Receiver 1.

1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 155 156

Sem comentários

Bosch DS7200V2-EXP Guia do Utilizador Página 78