Bosch DS7200V2-EXP Guia do Utilizador descarregar pdf (Página 15)

DS7200V2-EXP | Expert Programming Guide | 4. Control Panel Programming EN | 15

Bosch Security Systems | 8/04 | 4998153891C

DTMF/Pulse Dialing

• Address: 0132

• Default: 0 (DTMF)

• Selections:

− 0 = DTMF

− 1 = Pulse

This parameter selects the control panel dialing format (DTMF or Pulse). This format is used for all dialing

attempts.

Call Forwarding Auto On/Off Digits

• Address:

− Call Forwarding Auto On Digits: 0133 to 0164

− Call Forwarding Auto Off Digits: 0165 to 0180

• Default: All zeroes (0)

• Selections: See Table 4 on page 9

− Call Forwarding Auto On Digits: Up to 32 characters max

− Call Forwarding Auto Off Digits: Up to 16 characters max

This parameter configures the control panel’s Call Forwarding Auto On/Off operation.

In order to use this parameter, the premises must have Call Forwarding service from the local

telephone company. Call Forwarding Auto On/Off does not forward calls; it turns the telephone

company’s Call Forwarding service on or off by dialing digits just as the user would.

When entering phone numbers, use “10” ([1][0] from the keypad) to enter “0”; use “0” to terminate the

phone number.

Call Forwarding Auto On/Off is only available for Area 1.

If Call Forwarding Auto On/Off is enabled ([#][8][2]) and a user turns the system All On, the control panel dials

the Call Forwarding Auto On digits to activate the telephone company’s Call Forwarding service.

If Call Forwarding Auto On/Off is enabled ([#][8][2]) and a user turns the system off (from All On), the control

panel dials the Call Forwarding Auto Off digits to turn off the Call Forwarding service.

• A typical dialing sequence might be:

• Two-digit telephone company code (*21*)

• Pause

• Phone number to forward to (Example: 555-1212)

• Flash (on-hook, pause, off-hook)

• Terminate (t)

For this sequence, the entry at this parameter is *2 1 * p 5 5 5 1 2 1 2 f t.

See the DS7200V2 User’s Guide (P/N: 4998153894) for more information on Call Forwarding Auto On/Off.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 155 156

Sem comentários

Bosch DS7200V2-EXP Guia do Utilizador Página 15