Bosch DS7200V2-EXP Guia do Utilizador descarregar pdf (Página 17)

DS7200V2-EXP | Expert Programming Guide | 4. Control Panel Programming EN | 17

Bosch Security Systems | 8/04 | 4998153891C

RPS Answer Ring Count, Answering Machine Bypass

• Address: 0213

• Default: 7 (rings)

• Selections:

− 0 = Control panel does not answer phone

− 1 to 13 = Ring Count

− 14 = Answering Machine Bypass 1

− 15 = Answering Machine Bypass 2

The ring count sets the number of rings the control panel waits before picking up and seizing the phone line for a

remote programming session, or for remote arming with a telephone (see Arming Options 1 on page 37).

The control panel does not answer the phone for remote programming or remote arming with telephone when

this parameter is set to zero (0).

This ring count is used for any control panel arming state, armed or disarmed.

The Answering Machine Bypass function can be restricted to only operate when the system is armed All On or

Perimeter Only (see Arming Options 1 on page 37). When the Answering Machine Bypass function is restricted to

only operate when the system is armed All On or Perimeter Only, the control panel does not answer the phone

for a remote arming session when it is disarmed (Off). However, [#][4][3] still initiates a remote programming

session.

Answering Machine Bypass 1

1. Call the premises; let the phone ring no more than two (2) times. Then hang up/disconnect the remote

programmer.

2. Wait at least eight sec to call back, but call back within 45 sec.

3. The control panel then picks up after the first ring.

Answering Machine Bypass 2

1. Call the premises; let the phone ring no more than four (4) times. Then hang up/disconnect the remote

programmer.

2. Wait at least eight sec to call back, but call back within 45 sec.

3. The control panel then picks up after the first ring.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 155 156

Sem comentários

Bosch DS7200V2-EXP Guia do Utilizador Página 17