Bosch PIN8 N1 Especificações descarregar pdf (Página 85)

Rexroth SYNAX 200 Motion control configuration 4-47

DOK-SYNAX*-SY*-12VRS**-PR01-EN-P

Wear parts VPP 21

• The service life of the backlight in the LDC display is limited to a

certain number of operating hours. After this time the backlight will

produce only 50 % of its original brightness. The service life at the

used displays is about 10.000 hours. The backlight can not be

changed separately. To change the display please contact the Bosch

Rexroth customer service.

• The service life of a lithium battery to buffer the static memory is at

least 5 years. So the battery has to changed after 5 years, to avoid

data leakage because of discharged batteries.

• Hard disk: The hard disk is an electromechanic wear part that has to

be changed during the operating time. According to the manufacturer’s

specifications the hard disk has been developed for a service life of 60

months in consideration of the following conditions:

Operating hours / month Max. 333

Input/output cycles / month Min. 10 and max. 150

Operating conditions Temperature 40 °C

Rel. humidity 30 %

Height < 500 m

Accesses 30 % of the operating hours

Storage conditions Temperature < 30 °C

Rel. humidity < 70 %

Duration < 3 months

Fig. 4-84: Typical operating and storage conditions of the hard disk

The operation out of this typical conditions is permissible, whereby,

however, the service life of the hard disk may be reduced. However,

the ambient conditions specified for the overall device have to be

absolutely kept.

Wear parts that are without

guarantee

1 2 ... 80 81 82 83 84 85 86 87 88 89 90 ... 383 384

Sem comentários

Bosch PIN8 N1 Especificações Página 85