Bosch B450 Guia de Instalação descarregar pdf (Página 101)

System Event Timers

This section covers the features that involve timing, such as Entry and Exit Times, Sensor

Watch Time, and Siren Run Time.

Programming Entry/Exit Timers

There are two programming locations for Entry Timer 1, Entry Timer 2, Exit Time for AWAY

Mode, and Entry Guard Time for STAY Mode.

The first location of the timer allows you to set the timer in increments of 1 sec. The sec

location allows you to set the timer in increments of 16 sec. Add these two locations together

for the total time.

Example

To set the Entry Time to 18 sec, program Location 466 as 2 (2 x 1 sec = 2 sec) and Location

467 as 1 (1 x 16 sec = 16 sec) for a total time of 18 sec (2 + 16 =18).

Entry Timer 1

Location 466 to 467

Location Default

Increments of 1 sec (0 sec to 15 sec) 466 4

Increments of 16 sec (0 sec to 240 sec) 467 1

You can program Entry Timer 1 from 0 to 255 sec in increments of 1 sec. Entry Timer 1 is the

delay time used by the Delay-1 Zones.

Entry Timer 2

Location 468 to 467

Location Default

Increments of 1 sec (0 sec to 15 sec) 468 8

Increments of 16 sec (0 sec to 240 sec) 467 2

You can program Entry Timer 2 from 0 to 255 sec in increments of 1 sec. Entry Timer 2 is the

delay time used by Delay-2 Zones.

Exit Timer

Location 470 to 471

Location Default

Increments of 1 sec (0 sec to 15 sec) 470 12

Increments of 16 sec (0 sec to 240 sec) 471 3

10.1

10.2

10.3

10.4

Control Panel System Event Timers | en 101

Installation Guide 2014.07 | 00n | F01U298026

1 2 ... 96 97 98 99 100 101 102 103 104 105 106 ... 151 152

Sem comentários

Bosch B450 Guia de Instalação Página 101