Bosch FW5.50 Manual do Utilizador descarregar pdf

BL20

Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]

The BL20 Solution

The BL20 modular concept is a very flexible approach to terminal-wired I/O. The gateway, base and electronic

modules provide many benefits to the user.

• The gateway provides communication between the fieldbus and I/O modules; modules are not dependent on the

fieldbus protocol.

• DIN-rail mountable base modules are available with different wiring configurations to suit the user’s needs.

• Electronic modules are hot swappable.

• Power distribution modules can be used to create isolated power segments within the system.

BL20’s openness and flexibility provide a viable alternative to traditional PLC I/O.

Maximum Size of a BL20 Station

BL20 stations consist of a gateway and a maximum of 74 I/O modules (equivalent to 1 m station length). Some high-tech

and analog I/O modules may consume or produce large amounts of data, and therefore may further limit the number of

modules that may be used. It is highly recommended that I/Oassistant software is used when planning and commissioning

BL20 systems. This program allows you to build the BL20 node on your computer and verify that all restrictions with

regard to power and size are met. The free I/Oassistant software is available to download from TURCK website.

Addressing

As a node on a network, the BL20 station must have an address. The setting of this address is dependent on the network

system being used. Each network gateway has a set of rotary switches (one for the most significant digit, or 10’s multiplier,

and one for the least significant digit, or 1’s multiplier) that are used to set the address for the node. DeviceNet™ gateways

may be addressed between 0 and 63, while PROFIBUS®-DP and CANopen gateways can be set from 0 to 99.

BL20 Power Distribution

The power supply for a BL20 station is fed via power feeding or bus refreshing modules; the latter also being responsible for

the power supply to the internal module bus. Bus refreshing modules are used within a BL20 station (without gateway

supply) if the system supply to the BL20 modules (nominal current IMB 1.5 A) is no longer sufficiently guaranteed. Bus

refreshing modules are used with tension clamp (BL20-P3T-SBB-B or BL20-P4T-SBBC-B) or screw connection base

modules (BL20-P3S-SBB-B or BL20-P4S-SBBC-B). Power feeding modules are used if the system supply to the BL20

modules (nominal current IL < 10 A) is no longer sufficiently guaranteed.

System Supply Via Module Bus

The amount of BL20 modules that may be supplied by a bus refreshing module via the internal module bus depends on the

respective minimal current IMB of the individual modules on the bus. The sum of the nominal current inputs of the

connected BL20 modules must not exceed 1.5 A. BL20 gateway power requirements (supplied by the first bus refreshing

module) should be considered when calculating the required number of bus refreshing modules. If I/Oassistant software is

used, an error message is generated automatically via the <Station - Verify> as soon as the system supply is no longer

sufficiently guaranteed.

All bus refreshing modules used in a BL20 station should be connected via the same frame potential. The power supply to

the bus is fed via the connections 11 (plus) and 21 (ground) of the respective base module for the bus refreshing module.

1 2 3 4 5 6 ... 59 60

Resumo do Conteúdo

Página 1 - System Supply Via Module Bus

BL20Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected] BL20 SolutionThe BL20 modular concept is a very flexible

Página 2 - Access to the C-rail

BL20Part NumberInput CountPinoutStyleGroupDiagnosticsIndividualDiagnosticsWire-BreakDetectionI/O MapBL20-2DI-24VDC-P withBL20-S3*-SBB**2 B20-3A PNP 1B

Página 3 - Environmental Conditions

BL20-E-8DI-24VDC-PBL20-E-16DI-24VDC-P16DI..Discrete Input EconomyModule•Modular I/O• Fieldbus Independent Configuration•IP 20 Protection•Base and Elec

Página 4

BL20Part NumberCountPinoutStyleGroupDiagnosticsIndividualDiagnosticsWire-BreakDetectionI/O MapBL20-E-8DI-24VDC-P8 B20-E1 PNP 1BL20-E-16DI-24VDC-P16 B2

Página 5

BL20-4DI-NAMURNAMUR Input Module•Modular I/O•Fieldbus Independent Configuration•IP 20 Protection•NAMUR InputsElectrical• Operating Current: <40 mA

Página 6

BL20Part NumberInput CountPinoutStyleGroupDiagnosticsIndividualDiagnosticsWire-BreakDetectionI/O MapBL20-4DI-NAMUR withBL20-S4*-SBBS**4 B20-4C NAMUR X

Página 7

BL20-2DO-24VDC-2A-PBL20-2DO-24VDC-0.5A-NBL20-2DO-24VDC-0.5A-PBL20-4DO-24VDC-0.5A-PDiscrete DC OutputModules•Modular I/O•Fieldbus Independent Configura

Página 8

BL20Part NumberInput CountPinoutCurrentIndividualDiagnosticsWire-BreakDetectionI/O MapBL20-2DO-24VDC-0.5A-P with BL20-S3*-SBC**4 B20-3B 0.5 A 1BL20-2D

Página 9

BL20-E-8DO-24VDC-0.5A-PBL20-E-16DO-24VDC-0.5A-PDiscrete Output EconomyModule•Modular I/O•Fieldbus Independent Configuration•IP 20 Protection•Base and

Página 10 - Input Connectors

BL20Part NumberInput CountPinoutCurrentIndividualDiagnosticsWire-BreakDetectionI/O MapBL20-E-8DO-24VDC-0.5A-P8 BO-E1 0.5 A X 1BL20-E-16DO-24VDC-0.5A-P

Página 11

BL20-2DO-R-COBL20-2DO-R-NOBL20-2DO-R-NCDiscrete relay OutputModules•Modular I/O•Fieldbus Independent Configuration•IP 20 Protection•Relay OutputsElect

Página 12

Creating Potential GroupsBoth bus refreshing modules and power feeding modules may be used to create a potential group. The base modulecreates the po

Página 13

BL20Outputs DataOutByte Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0n–1 (Data for modules to the left)n Data for next discrete modules O-1 O-0n+1 (

Página 14

BL20-2DI-120/230VAC-PDiscrete AC Input ModuleElectrical• Operating Current: <28 mA (from VMB)<20 mA (from VIO)Power Distribution• Inputs: VIO•

Página 15

BL20Part NumberInput CountPinoutStyleGroupDiagnosticsIndividualDiagnosticsWire-BreakDetectionI/O MapBL20-2DI-120/230VAC-P withBL20-S3*-SBB**2 B20-3C A

Página 16 - B20-6BB20-3B

BL20-2DO-120/230VAC-0.5ADiscrete AC Output Module•Modular I/O•Fieldbus Independent Configuration•IP 20 Protection•AC OutputsElectrical• Operating Curr

Página 17

BL20Part NumberOutputCountPinoutCurrentIndividualDiagnosticsWire-BreakDetectionI/O MapBL20-2DO-120/230VAC-0.5A-P withBL20-S3*-SBC**2 B20-3B 0.5 A 1* T

Página 18

BL20-32DI-24VDC-PBL20-16DI-24VDC-PDiscrete Input Blocks•Modular I/O•Fieldbus Independent Configuration•IP 20 Protection•Various I/O StylesElectrical•

Página 19

BL20Part NumberInput CountPinoutStyleGroupDiagnosticsIndividualDiagnosticsWire-BreakDetectionI/O MapBL20-16DI-24VDC-P withBL20-B3*-SBB**16 B20-B3A PNP

Página 20

BL20-32DO-24VDC-0.5A-PBL20-16DO-24VDC-0.5A-PDiscrete Output Blocks•Modular I/O•Fieldbus Independent Configuration•IP 20 Protection•Various I/O StylesE

Página 21

BL20Part NumberOutputCountPinoutCurrentIndividualDiagnosticsWire-BreakDetectionI/O MapBL20-16DO-24VDC-0.5A-P withBL20-B3*-SBC**16 B20-B3B 0.5 A 1BL20-

Página 22

BL20-2AI-U(-10/0 to +10VDC)BL20-2AI-I(0/4 to 20MA)BL20-1AI-U(-10/0 to +10VDC)BL20-1AI-I(0/4 to 20MA)Analog Input Modules•Modular I/O•Fieldbus Independ

Página 23

BL20General Technical DataPotential isolations Via OptocouplerAmbient temperatureOperating temperature +32 to +131°F (0 to +55°C)Storage temperature -

Página 24

BL20Part NumberInput CountPinoutStyleGroupDiagnosticsIndividualDiagnosticsWire-BreakDetectionI/O MapBL20-1AI-U(-10/0 to +10VDC) withBL20-S4*-SBBS**1 B

Página 25

BL20-4AI-U/IAnalog Input Module•Modular I/O•Fieldbus Independent Configuration•IP 20 Protection•Voltage and Current InputsElectrical• Operating Curren

Página 26

BL20Part NumberInput CountPinoutStyleGroupDiagnosticsIndividualDiagnosticsWire-BreakDetectionI/O MapBL20-4AI-U/I withBL20-S6*-SBCSBC**4 B20-6C0/4 to 2

Página 27

BL20-2AI-THERMO-PIBL20-2AI-PT/NI-2/3Temperature Input Modules•Modular I/O•Fieldbus Independent Configuration•IP 20 Protection•Thermocouple or RTD Inpu

Página 28 - B20-B6B B20-B3B

BL20Part NumberInput CountPinoutStyleGroupDiagnosticsIndividualDiagnosticsWire-BreakDetectionI/O MapBL20-2AI-PT/NI-2/3 withBL20-S4*-SBBS**2 B20-4F RTD

Página 29

BL20-2AO-I(0/4 to 20MA)BL20-2AO-U(-10/0 to +10VDC)BL20-1AO-I(0/4 to 20MA)Analog Output Modules•Modular I/O•Fieldbus Independent Configuration•IP 20 Pr

Página 30 - B20-4D B20-4E

BL20Part NumberOutputCountPinoutStyleGroupDiagnosticsIndividualDiagnosticsWire-BreakDetectionI/O MapBL20-1AO-I(0/4 to 20MA) withBL20-S3*-SBB**1 B20-3D

Página 31

BL20-1RS232BL20-1SSIBL20-1RS485/422Serial I/O Modules•Modular I/O•Fieldbus Independent Configuration•IP 20 Protection•Various I/O StylesElectrical• Op

Página 32

BL20Part NumberInput CountPinoutStyleGroupDiagnosticsIndividualDiagnosticsWire-BreakDetectionOutputCountPinoutStyleIndividualDiagnosticsWire-BreakDete

Página 33

BL20-1CNT-24VDCCounter Module•Modular I/O•Fieldbus Independent Configuration•IP 20 Protection•Counter InputElectrical• Operating Current: <50 mA (f

Página 34 - B20-4G B20-4F

BL20-GWBR-DNETDeviceNet Gateway•Modular I/O•Fieldbus Independent Configuration•IP 20 Protection•Various I/O StylesElectrical• Operating Current: <2

Página 35

BL20Part NumberInput CountPinoutStyleGroupDiagnosticsIndividualDiagnosticsWire-BreakDetectionI/O MapBL20-1CNT-24VDC withBL20-S4*-SBBS**1 B20-4K Counte

Página 36 - B20-3D B20-3E

BL20-PF-120/230VAC-DBL20-PF-24VDC-DPower Feeding Modules•Modular I/O•Fieldbus Independent Configuration•IP 20 Protection•Supply AC or DC I/O PowerElec

Página 37

BL20B20-P3Part Number PinoutBL20-PF-120/230VAC-D with BL20-P3*-SBB**B20-P3BL20-PF-120/230VAC-D with BL20-P4*-SBBC**B20-P4BL20-PF-24VDC-D with BL20-P3*

Página 38 - Input/Output Connectors

BL20-BR-24VDC-DBus Refreshing Module•Modular I/O•Fieldbus Independent Configuration•IP 20 ProtectionElectrical• Module Bus Supply: <1.5 A• I/O Sup

Página 39

BL20B20-P3A B20-P4APart Number PinoutBL20-BR-24VDC-D with BL20-P3*-SBB-B**B20-P3ABL20-BR-24VDC-D with BL20-P4*-SBBC-B**B20-P4A* T = Tension clampS = S

Página 40

Each gateway can support up to 3 SWIRE modules for a total of 48 non-reversing motor starters on a single gateway. Anyreversing motor starter is consi

Página 41

BL20Available Motor Starter SizesPart NumberMotor Rating @ 480 VACRated OperationalCurrent @ 480 VACRated UninterruptedCurrent @ 480 VACClassification

Página 42

hp Motor Contactor Part NumberWiring Set PartNumberRelay Part NumberSWIRECommunication0.08 PKZM0-0.25PKZM0-XDM12DILM7-10(24 VDC)BL20-SWIRE-DIL0.12 PKZ

Página 43

BL20Reversing Part Numbershp Part NumberWiring SetNumberRelay Part Number Relay Part NumberSWIRECommunicationSWIRECommunicationMechanicalInterlock0.08

Página 44 - B20-P3A B20-P4A

•Modular Motor Starter Control•Fieldbus IndependantConfiguration•IP 20 Protection•Base and Electronics in One PartSWIRE EconomyCommunication ModuleBL2

Página 45 - BL20 Motor Starter Modules

BL20BL20-GW-DPV1PROFIBUS-DP Gateway•Modular I/O•Fieldbus Independent Configuration•IP 20 Protection•Various I/O StylesElectrical• Operating Current: &

Página 46 - Available Motor Starter Sizes

BL20Part NumberInput CountPinoutCurrentGroupDiagnosticsIndividualDiagnosticsWire-BreakDetectionI/O MapBL20-E-1SWIRE13 AX X 1Note: This module can onl

Página 47 - Non-Reversing Part Numbers

• Wires Motor Overload Contactor to Relay ModuleMotor Starter Wiring SetHousing Part Number ApplicationPKZM0-X*M*2•Different styles for different ampe

Página 48 - Reversing Part Numbers

BL20• Controls SWIRE Communication and Activates the Motor StarterSWIRE CommunicationHousing Part Number ApplicationBL20-SWIRE-DIL•Use with all DILM*

Página 49

Power Feed Module• Safety Zone SeparationHousing Part Number ApplicationBL20-SWIRE-PF•Separate motor starter sets into separate safety zones• Easily C

Página 50

BL20Base Modules for Slice I/OHousing Part Number DescriptionThree Terminal Block BL20-S3T-SBBTension Clamp ConnectionBL20-S3S-SBBScrew Terminal Conne

Página 51 - Motor Overload Contactor

Base Modules for Slice I/OHousing Part Number DescriptionFour Terminals with C-Connection BL20-S4T-SBBCTension Clamp ConnectionBL20-S4S-SBBCScrew Term

Página 52 - Relay Module

BL20Housing Part Number DescriptionThree Terminal Block BL20-B3T-SBBTension Clamp ConnectionBL20-B3S-SBBScrew Terminal ConnectionThree Terminal Block

Página 53 - Bus Commoning Bars

Housing Part Number DescriptionSix Terminal Block withC-ConnectionB6T-SBCSBCTension Clamp ConnectionB6S-SBCSBCScrew Terminal ConnectionBase Modules fo

Página 54 - Base Modules for Slice I/O

BL20Housing Part Number DescriptionThree Terminal Power Base BL20-P3T-SBBTension Clamp ConnectionBL20-P3S-SBBScrew Terminal ConnectionThree Terminal P

Página 55

Housing Part Number DescriptionMarkersUsed for color coding terminals onBL20 base modulesXN-ANBZ-WS (10/PKG)XN-ANBZ-GN/GE/BED (10/PKG)XN-ANBZ-RT/BL-BE

Página 56 - Base Modules for Block I/O

BL20-GW-ENBL20-PG-ENEthernet Gateway•Modular I/O•Fieldbus Independent Configuration•IP 20 Protection•Various I/O StylesElectrical• Operating Current:

Página 57

BL20Housing Part Number DescriptionLabels FW5/151-200 (10 SETS/PKG)FW5/101-150 (10 SETS/PKG)FW5/51-100 (10 SETS/PKG)FW5/1-50 (10 SETS/PKG)Numbered 151

Página 58 - Base Modules for Power Input

BL20BL20-GW-EN-IPBL20-PG-EN-IPEthernet Gateway•Modular I/O•Fieldbus Independent Configuration•IP 20 Protection•Various I/O StylesElectrical• Operating

Página 59

BL20-GWBR-CANOPENCANopen Gateway•Modular I/O•Fieldbus Independent Configuration•IP 20 Protection•Various I/O StylesElectrical• Operating Current: <

Página 60

BL20-2DI-24VDC-NBL20-2DI-24VDC-PBL20-4DI-24VDC-NBL20-4DI-24VDC-P(shown)Discrete Input Modules•Modular I/O•Fieldbus Independent Configuration•IP 20 Pro