Bosch DS7400XiV4-EXP Especificações descarregar pdf (Página 86)

DS7400XiV4-EXP | Reference Guide | 5.0 Programming the Control Panel EN | 86

Bosch Security Systems | 1/05| 4998154963B

For example, use the following steps to program Output Function 4 to follow Zone 1 when the zone is shorted and

the control panel is armed.

1. Enter “*3” (see Table 124) in Data Digit 1 of Program Address 1 (2781).

This option programs the output function to follow a selected zone in an input/output cross matrix.

2. Enter “1” (see Table 128) in Data Digit 2 of Program Address 1 (2781).

This option programs the output function to activate when the zone it follows is shorted and the control panel

is armed.

3. Enter “0” in Data Digit 1 of Program Address 2 (2782), and “1” in Data Digit 2 of Program Address 2 to

assign this output function to Zone 1. The entries made in Program Address 2 are hex values (see Table 113).

Output Function 4 is now assigned to follow Zone 1. Any output assigned to Output Function 4 activates when

Zone 1 is shorted and the control panel is armed.

Follow Two Zones

Data Digit 1 Options *4 and *5 program an output function to follow two zones in an input/output cross matrix.

• Option *4: Follow two zones when EITHER zone changes state.

• Option *5: Follow two zones when BOTH zone changes state.

This option requires the use of three program addresses:

• Program Address 1: Enter the output function option in Data Digit 1 (see Table 116); enter the zone/control

panel state option in Data Digit 2 (see Table 128).

• Program Address 2: Enter the first zone number in Data Digits 1 and 2 using hex values (see Table 113).

• Program Address 3: Enter the second zone number in Data Digits 1 and 2 using hex values (see Table 113).

• See Table 116 for output function options. See Table 126 for output function numbers/program addresses.

1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 143 144

Sem comentários

Bosch DS7400XiV4-EXP Especificações Página 86