Bosch LTC 2604 Manual de Instruções descarregar pdf (Página 28)

IntuiKey Series | Instruction Manual | Controlling Divar Series Digital Video Recorders

Bosch Security Systems | 28 June 2004

5CONTROLLING DIVAR

SERIES DIGITAL VIDEO

RECORDERS

NOTE: This section applies to KBD-Universal and

KBD-Digital Models.

5.1 The Divar Main Control Menu

5.1.1 Accessing the Divar Main Control Menu

1. Press PROD to put the keyboard in the Product

Selection Mode. The softkey display shows the Product

Selection Menu. Depending on the number of DVRs

that are connected to the IntuiKey, the list may

show a single device name or up to 32 device

names spanning three (3) menu screens.

2. Press the softkey button adjacent to the desired

DVR device name in the display. The softkey

display menu will change to the top level menu

associated with the device.

NOTE: If you are already in a product sub-menu, and

multiple products are connected to the IntuiKey, the

keyboard provides a means for easy switching between

the devices. Press and hold the PROD key for longer

than one (1) second to enter the device address selection

mode. The status display will change to display the

following:

Enter the address of the desired device to make the

keyboard immediately switch to that device’s main menu.

3. The status display shows the DVR mode display.

FIGURE 5-1 Status Display in Divar Mode

The DVR mode is shown on the keyboard status

display and provides the following indicators:

• SEQ – Indicates that the DVR is running a

sequence.

• MONA/B – Indicates which DVR monitor is

currently under control. It toggles between

MONA and MONB for each press of the

MON key.

NOTE: Keyboard access to MONB must be enabled

within the Divar menus. See Divar manual for details.

•Indicates that the DVR is in an ACTION

alarm mode.

•Indicates that the DVR is in a contact

activated alarm mode.

• REC – Indicates that the DVR is currently

recording.

• PLAY – Indicates that the DVR is in a replay

mode.

• ZOOM – Indicates that the DVR is

displaying a zoomed image.

• ALM xx – Indicates that a device connected

to the IntuiKey with address number xx is

currently in alarm. The IntuiKey’s alarm

button will light and the keyboard will begin

to beep.

NOTE: While in DVR Control Code, the product

title continuously displays the programmed device

name. The numeric entry field is used to enter numeric

values needed to control the DVR (i.e. camera

number, DVR number, shot number, etc.). Above the

numeric entry field is a title displaying the DVR’s

current mode (i.e. cameo, camera entry, menu mode,

or numeric entry).

Address

DVR

Rec Camera

Seq Play

12MONA Zoom

ALM 13

DVR#01

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 47 48

Comentários a estes Manuais

Sem comentários

Bosch LTC 2604 Manual de Instruções Página 28

Comentários a estes Manuais

Manuais e produtos relacionados com Sistemas de segurança - controlo de acesso Bosch LTC 2604