Bosch LTC 2604 Manual de Instruções descarregar pdf (Página 12)

IntuiKey Series | Instruction Manual | Operating the IntuiKey Digital Keyboard

Bosch Security Systems | 28 June 2004

3OPERATING THE INTUIKEY

DIGITAL KEYBOARD

3.1 Learning the IntuiKey Components

Learning the IntuiKey Keyboard components is

accomplished easily by dividing the keyboard into four

separate functional areas as shown in FIGURE 3-1:

• The Status Display

• The Keypad

• The Softkeys and Softkey Display

• The Joystick

FIGURE 3-1 IntuiKey Components

3.1.1 The Status Display

The Status Display changes dynamically to display

pertinent information about the keyboard’s present

mode of operation. Typically, its information conveys

one of two keyboard operating modes: Normal Mode or

Error Code.

In Normal Mode, the status display provides data

pertaining to the present device under control (e.g.

monitor number, camera number, device under control

status, etc.). Common elements in the display for all

devices are a product indicator centered on the bottom

line of the display and one or more numeric entry

cells. Each numeric entry cell has a title that describes

what the number represents.

When a user operation results in an error, the status

display changes to Error Code (see SECTION 4.3 for

Allegiant Error Messages, SECTION 4.4 for ADIM

Error Messages, SECTION 5.3 for Divar Error

Messages, and SECTION 6.3 for MUX Error

Messages). The display shows the error number, a

short description of the error, and the present device

under control.

The display reverts to Normal Mode either automatically

in two seconds (on its own) or when CLR is pressed.

3.1.2 The Keypad

The Keypad includes the five function buttons (located

directly below the status display), as well as the

numeric keypad.

PROD displays the keyboard’s Product Selection menu.

This function key (in conjunction with the

Softkeys/Softkey Display) selects the device under the

control of the keyboard. The Product Selection menu

also provides access to the Keyboard Control menu.

MON functioning depends on the IntuiKey Model and

device under control. For KBD-Universal keyboards,

MON allows entry of a Monitor Number when

controlling an Allegiant Switcher. When controlling a

DVR or multiplexer, MON toggles between monitors

A and B.

CLR clears any numeric entry and the display reverts

to Normal Mode.

provides acknowledgement of an external

alarm/alert/action condition. When this condition is

detected, an audible alarm is enabled, and the key

flashes red. The key then functions differently

depending on the device presently under keyboard

control.

NOTE: Refer to SECTION 3.3 for additional

information on alarm/alert/action indication and

acknowledgement.

SHOT allows selection of camera pre-positions and is

also used to assign softkey display screen numbers.

Pressing SHOT twice enters the preposition

programming entry mode. If SHOT is pressed twice

inadvertently, press SHOT again to return to the

pre-position selection mode.

The Numeric Keypad allows numeric entry (shown in

the status display) as required by the present function.

Note that the default state of the Keypad is camera entry

(i.e. pressing a numeric key places that number in the

status display under the camera title).

Prod Mon

Clr

321

654

987

Shot

Monitor Camera

MUX/DVR

1 1

SoftKeys

SoftKey Display

Status Display

Numeric

Entry Cell

Numeric Keypad

SoftKey Descriptor

Exit

^ Up Zoom

v Down

< Left Right >

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 47 48

Comentários a estes Manuais

Sem comentários

Bosch LTC 2604 Manual de Instruções Página 12

Comentários a estes Manuais

Manuais e produtos relacionados com Sistemas de segurança - controlo de acesso Bosch LTC 2604