Bosch INTEGRUS Manual de Serviço descarregar pdf (Página 37)

INTEGRUS | Digital Infra-red Language Distribution System en | 37

BOSCH Security Systems | February 2003

2.5.4 View fault status

The fault status of the radiators can be seen in the second screen of the Main menu:

Menu Items Value (read only) Description

1 Fault Status Fault:

- No Faults

The connected radiators function without problems.

- Radiator Fault

One of the connected radiators is not functioning properly.

- No Radiators

No radiators are connected to the transmitter.

When the system detects a failure for the first time, a flashing fault message pops-up on any menu screen:

Radiator Fault

No Radiators

Push the menu button to remove the fault message from the screen and to go back to the menu screen that was visible before

the fault message popped-up. The flashing message will also disappear when the fault has been resolved.

2.5.5 Set monitoring options

The Monitoring sub-menu (2) is used to set which signal is sent to the monitoring headphone output. It can be one of the

inputs, one of the channels or no signal.

When the sensitivity of one of the inputs is being changed in the Setup menu (4I, 4J or 4K), or when assigning inputs to

channels (menu 4C, Per Channel), the monitoring output automatically switches temporarily to that source, even when the

option 'None' has been chosen.

When the headphone output is disabled (see section 2.5.17), the output level can not be changed and the level indicator is not

visible.

Menu Item Option Value 1 Value 2 Description

2A Source/Volume Source:

- In. nn

Input nr:

00 ... 31

Volume:

-31 ... 0 dB

The signal from audio input nn is available on the

monitoring headphone output.

- Ch. nn

Channel nr:

00 ... 31

Volume:

-31 ... 0 dB

The signal on channel nn is available on the

monitoring headphone output.

- Aux.L

Volume:

-31 ... 0 dB

The signal on the Aux. Left input is available on the

monitoring headphone output.

- Aux.R

Volume:

-31 ... 0 dB

The signal on the Aux. Right input is available on the

monitoring headphone output.

- None

Volume:

-31 ... 0 dB

The monitoring headphone output is switched off

during normal operation, but is active when the

sensitivity of one of the inputs is being changed.

The 'Source/volume' screen also displays level meters (two for a stereo source, one for a mono source) for a visual indication of

the actual signal strength: ▄ = low level, █ = high level, ▲ = overflow.

2.5.6 View version information

In the Enquiry sub-menu (3), version information of the transmitter can be found. This information should be mentioned in

service requests or failure reports.

Menu Item Value (read only) Description

3A Board Nr e.g. 19.1.000001 Shows the serial number of the transmitter board.

3B Board Version e.g. 01.00 Shows the version number of the transmitter board.

3C Software Version e.g. 1.00.0001 Shows the version number of the configuration software.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 59 60

Comentários a estes Manuais

Sem comentários

Bosch INTEGRUS Manual de Serviço Página 37

Comentários a estes Manuais

Manuais e produtos relacionados com Sistemas de segurança - controlo de acesso Bosch INTEGRUS