Bosch Alarm Panel Interface Manual
Revision 1.4
2 Configuring System Galaxy
The following steps are required to properly setup System Galaxy to interface with the alarm panel.
Step Action Reference
1
All installation, wiring and programming of the Alarm Panel
should be completed before configuring System Galaxy.
The
Alarm Panel should be installed and fully configured before
configuring System Galaxy.
Manufacturer’s
documentation
2
Connect the alarm panel to the System Galaxy Communication
PC (the computer running GCS services) including known
requirements.
Sect 2.1 – Connecting to
the Alarm Panel and the
manufacturer’s documents
3
Register the Alarm Panel Support in System Galaxy
Section 3
4
Setup Workstation Options as needed:
A – specify the Graphics path for Alarm Icons (section 4.1)
B – set the Alarm Options for the Workstation (section 4.2)
Section 4
5
Add (setup) the Alarm Panel in System Galaxy to match the
setup of the Bosch Alarm Panel.
Section 5
6
Add (setup) the Alarm Areas in System Galaxy to match the
setup of the Bosch Alarm Panel.
Section 6
7
Add (setup) the Alarm Points in System Galaxy to match the
setup of the Bosch Alarm Panel.
Section 7
8
Setup and Start the Alarm Panel Service – this service is
installed to run automatically by default and should be running.
Note that additional information for managing the service is
provided in Section 8, however the service should install to the
proper default settings. The additional information is included to
explain settings and operation default settings are to be altered.
Section 8
8.1 – starting the service
8.2 – setting service to start
automatically
At this point System Galaxy should begin receiving events from the Alarm Panel.
The remaining sections cover operating the System Galaxy Alarm Panel features.
Getting Status Events from the Alarm Panel
Section 9
Command Menus for the Alarm Panel
Section 10
Device Status screen for the Alarm Panel
Section 11
Adding Icons for the Graphics Screen
Section 12
Placing Alarm Points on the Graphics screen
Section 13
Crystal Reports
Section 14
Managing Alarm Panel User Codes from System Galaxy
Section 15
Page 8 of 37
(44 páginas)
(8 páginas)
(64 páginas)
(20 páginas)
(10 páginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais