Bosch 7000 Series Manual descarregar pdf (Página 18)

 Bosch Alarm Panel Interface Manual

Revision 1.4

Graphic Symbols tab (if using the Graphics screen)

Allows operator to configure which icons represent each Alarm Panel status condition. User can

choose the condition from the drop list and select an available graphic from the default directory

or browse to a directory where graphics are stored.

 Select status condition: pick the condition to match with a graphic icon

 Choose a graphic condition: pick an icon to match to the selected condition

 Use the […] button to browse to a different directory if desired

 Use the [Copy Symbols from another Point] to copy the icon configuration from a

previously programmed alarm point. This is a quick way to reproduce the icon

mapping for multiple points that use the same symbols.

 Note that changes are saved when the [Apply] button is selected

FIG 7b: Graphics Symbols tab (cropped)

Note: it is a good idea to establish a standard color pattern. Consistency avoids confusion.

For example a pattern of color use could be as follows:

 red icons (doors, dots, etc.) used for ‘armed – not normal’ conditions

 green icons for ‘armed – normal’ conditions

 yellow icons for ‘unarmed – not normal’ conditions

 blue icons for ‘unarmed – normal’ conditions

 gray icons for ‘bypassed’ conditions

Page 18 of 37

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 36 37

Sem comentários

Bosch 7000 Series Manual Página 18