Bosch DS7445i Guia do Utilizador descarregar pdf (Página 16)

PART II: KEYPAD USER’S GUIDE: DS7447i LCD KEYPAD

4. Press the [2] key to change authority levels. The

keypad display scrolls:

To change level

For PIN 3,

Press 3 *.

To change level

For PIN 4,

Press 4 *.

Push # to exit

5. Enter the PIN number (1-32) that you want to

change the authority level for, followed by the [*]

key.

For example, press [3] + [*] to change the

authority level for PIN 3. The keypad display

scrolls through the following:

PIN 3 level 2

Enter new level.

Level choices

Are 1 to 4.

Push # to exit.

If the user does not exist in the system as set

up by your Security Company, the keypad

emits an error tone.

6. Enter the new authority level (1-4) for the PIN

that you want to change. Your Security Company

determines the authority levels.

7. Press the [#] key to exit this feature. Press [#]

again to return to the normal display.

4.17 Add a PIN

I can perform this function.

I cannot perform this function.

Key Sequence: [#] + [5] + [6]

Description

Use this function to add new PINs to the system. This

function requires the appropriate authority level to add

PINs. To add a new PIN to the system, you must

assign an area(s) to the new user in addition to using

the other PIN features (changing a PIN and changing

a PIN authority level) as outlined below.

Only use this feature under the direction of your

Security Company.

Procedure

1. Make sure the system is turned off (Armed LED

is off).

2. Enter a valid user PIN.

3. Enter [#] + [5] + [6].

The keypad display scrolls through the following

selections:

Push 1 to change

PINs.

Push 2 to change

authority levels.

Push 3 to change

areas assigned.

4. Press the [3] key to assign an area(s) to the new

user.

Enter the user number (1-32) you wish to assign

area(s) to followed by the [*] key. For example, for

User 4, press [4] + [*]. The keypad toggles between

the following displays:

PIN 4 Areas:

- - - -

Press 1 to 4 to

toggle areas.

5. Enter the area(s) you want to assign to the new

user by pressing the appropriate numeric key(s).

For example, if the user is to be assigned to

Areas 1 and 2, press the [1] and [2] keys. The

keypad displays:

PIN 4 Areas:

1 2 - -

To remove a currently assigned area(s), press the

corresponding numeric key(s). For example, if User 4

is assigned to Areas 1 and 2, but should only be

assigned to Area 1, press [2] to remove Area 2 from

User 4’s area assignment.

6. Press the [#] key twice to return to the three

selections shown in Step 3.

7. Press the [1] key to create a PIN for the new

user.

8. Enter the user number (1-32) followed by the [*]

key. For example, press [4] + [*] to create a PIN

for User 4.

9. When the display prompts, “Please enter new

PIN,” enter the new PIN. If the error tone sounds,

try a different new PIN. Enter the new PIN again

for verification.

10. Press the [#] key twice to return to the three

selections shown in Step 3.

11. Press the [2] key to assign a PIN authority level

to the new user.

12. Enter the user number (1-32) followed by the [*]

key. For example, press [4] + [*] to assign an

authority level for User 4.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 53 54

Comentários a estes Manuais

Sem comentários

Bosch DS7445i Guia do Utilizador Página 16

Comentários a estes Manuais

Manuais e produtos relacionados com Sistemas de segurança - controlo de acesso Bosch DS7445i