Bosch ISW-BIT1-HAX WLSN INSTALLATION Especificações descarregar pdf (Página 41)

wLSN | Reference Guide | 11.0 wLSN Relay Module

Bosch Security Systems, Inc. | 3/07 | F01U009440-01 41

11.0 wLSN Relay Module

(ISW-BRL1-WX)

The wLSN Relay Module allows the control panel to switch outputs

of devices wirelessly. Features include:

• The ability to control external devices wirelessly through a

Form C relay

• The ability to synchronize the output of multiple wLSN devices

such as sirens

• A supervised point for monitoring external devices (refer to

Section 6.1 Supported Wiring Configurations on page 31)

• Secondary external power source option

• An LED for RFSS and Discovery Modes

Table 17: Relay Module Specifications

Wire Gauge 0.14 mm (22 AWG) to 1.5 mm (14 AWG)

Power Four AA batteries, 1.5 V alkaline

External Power

Source (optional)

12 VDC nominal, 6 VDC to 14 VDC

DC+ and DC –

External power source, 12 VDC

nominal, 6 VDC to 14 VDC

PT + and PT –

(input)

Input, supervised sensor loop

Terminal Blocks

NO, C, NC (output)

Relay output for control of

external devices.

Relay Output 2A at 30 VDC (resistive load)

Cover and Wall

Tamper Switch

Transmits a tamper signal when the cover is removed

from its base or the unit is pulled away from the wall.

EN50131-1 Security Grade 2, Environmental Class II

The external power option is intended to be used as a

supplemental (secondary) source of power only. Do not

operate the Relay Module without the batteries.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 59 60

Sem comentários

Bosch ISW-BIT1-HAX WLSN INSTALLATION Especificações Página 41