Bosch PPC6 2 Series Manual de Serviço Página 31

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 394
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 30
R911305038 / 01 | Rexroth VCP-Operating Concept Electric Drives and Controls | Bosch Rexroth AG 5-1
Standard Mode
5 Standard Mode
The small operator terminals are usually used in the Standard Mode of
operation. The devices deliver maximum performance in this mode.
5.1 Setting the Operating Mode
The factory setting for all operating devices is the Standard Mode of
operation. You use the user mode switch to set the operating mode.
To set the user mode switch with four switches to the operating mode
Standard Mode:
Make sure that you set the operating mode when the device is switched
off. This ensures that the device accepts the new operating mode.
Note the switch positions ON and OFF marked on the user mode switch.
Depending on the user mode switch, the position of the switches may
vary.
Refer to the user manual for the device for more information on the po-
sition of the user mode switch.
After you switch on the power supply, the switch position is only read
and evaluated once, that is, during the initialization phase.
Switch Position
1ON
2OFF
3OFF
4OFF
Fig. 5-1: User mode switch with four switches set to Standard Mode
If switch 1 is OFF the small operator terminal is in „Transparent Mode“.
The „Transparent Mode“ is not described in this manual, because
Rexroth applications do not use it, yet.
Vista de página 30
1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 393 394

Comentários a estes Manuais

Sem comentários