Bosch PIN8 N1 Manual de Instalação descarregar pdf (Página 27)

RAID Subsystem DVA-08K | Installation Manual Subsystem Monitoring | en 27

Bosch Security Systems F.01U.027.797 | V1 | 2006.05

4.2.7 LCD Keypad Panel

The LCD panel located on the front aluminum foldable handle comes with three status LEDs.

The LEDs are marked from top to bottom “PWR,” “BUSY” and “ATTEN” and are clearly seen in

Figure 4.6 below. The definitions of these LEDs are shown in Table 4.6. The mute button can

be used to stop the alarm until the next controller event occurs.

Fig. 4.6 LCD Keypad Panel

Color Status

Flashing Green The power supply has not been turned on. The PSU module LED will

blink when the subsystem is connected to a power source but has not

been turned on.

Static Green The PSU is operating normally and experiencing no problems

Static Red The PSU has failed and is unable to continue providing power to the

subsystem.

OFF The power cord is unplugged or the power cord is plugged but no

power is being supplied from the power source.

Table 4.5 PSU Module LED Definitions

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 61 62

Sem comentários

Bosch PIN8 N1 Manual de Instalação Página 27