Bosch NET 682 C Manual de Instruções descarregar pdf (Página 13)

STANDARD FLUE INSTALLATION

INSTALLATION

INSTALLATION INSTRUCTIONS

STANDARD FLUE INSTALLATION

8 718 682 335b (09.2008)

NOTE: to ease assembly of the flue components,

grease seals lightly with the solvent-free grease

supplied.

Check all the seals are seated properly in the grooves

provided and are in good condition.

All flue joints must be sealed to prevent leakage of

condensate and flue products.

Installing the standard flue:

Set the flue terminal (B) to the distance

required, secure with screw and seal joint

with the aluminium tape supplied.

Slide the inner wall seal (C) onto the

terminal (B) as shown.

If fitting from inside the building; slide

the outer wall seal (K) onto terminal (B).

Position terminal (B) through the flue

opening in the wall to the outside of the

building by the distance shown.

The flue terminal (B) MUST be fitted

with the 'TOP' uppermost to allow the

correct fit and use of the plume

management system.

If fitting from the outside of the building;

slide the outer wall seal (K) onto terminal

(B) to fit against the outer wall.

Roll the boiler into position on the floor

mounting frame.

Position connector (A) with ‘TOP’

uppermost to align with the three holes in

the boiler inner casing (E).

Secure using three hexagonal bolts (F).

Push-fit adaptor (G) into elbow (H) until

secured by the clip.

Slide adaptor (G) into the inner flue tube

of terminal (B) and push elbow (H) into

flue outlet (J) until secured by the retaining

clips ensuring a good seal is made.

TOP

Clip

TOP

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 23 24

Comentários a estes Manuais

Sem comentários

Bosch NET 682 C Manual de Instruções Página 13

Comentários a estes Manuais

Manuais e produtos relacionados com Fogões Bosch NET 682 C