Bosch X40 Manual do Utilizador descarregar pdf (Página 96)

96 en | Operation VideoJet X40 SN

DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Systems

View Control

Control options for peripherals (for example a pan/tilt head or dome camera) depend on the

type of unit installed and on the configuration of the VideoJet X40 SN.

If a controllable unit is configured and connected to the VideoJet X40 SN, the controls for the

peripheral are displayed next to the video image.

1. To control a peripheral, click the appropriate controls.

2. Move the mouse cursor over the video image. Additional options for controlling

peripherals are displayed with the mouse cursor.

Digital I/O

The alarm icons Input 1 to Input 4 are for information purposes and indicate the status of an

alarm input: When an alarm is triggered, the corresponding icon lights up blue. The unit's

configuration determines whether the alarm is displayed, as well as additional details (see

Section 5.15 Advanced Mode: LIVEPAGE Functions, page 43).

Triggering Relay

You can switch connected units using the relays in the VideoJet X40 SN (for example lights or

door openers).

X To activate this, click the icon for the corresponding relay next to the video image. The

icon will be red when the relay is activated.

1 2 ... 91 92 93 94 95 96 97 98 99 100 101 ... 129 130

Sem comentários

Bosch X40 Manual do Utilizador Página 96