Bosch 430 Especificações descarregar pdf (Página 9)

9/17

Bosch Rexroth Canada ı 16.10.2008 ı Revision 2.2

4.3 Parameter Description

Function

Parameter

No.

Description

Setting the

spread rates

1 to 9

Nine spread rates can be c

onfigured. The rate programmed

under Parameter 1 will be the rate under position 1 of the

conveyor dial in operation mode. Parameter 9 is position 9 of

the conveyor dial.

Setting the

spinner speed

11 to 19

Nine spinner speeds can be configured. The rate p

rogrammed

under Parameter 11 will be the rate under position 1 of the

spinner dial in operation mode. Parameter 19 is position 9 of

the spinner dial.

Selection of

Solid control

mode

Allows the selecti

on of one of five control modes:

“Manual”, “12V triggered”, “Ground speed triggered”,

“Open Loop” and “Closed loop”. See page 3 for a more in-

depth description of operation.

• Toggle the power on and off to accept the control mode

change.

Conveyor

Autonull

Used to automatically set the minimum and

imum valve

setting on the conveyor. Available in closed loop mode.

Calibrating

solid material

Material calibration

s. See “calibration procedure” o

n page 1

Weight per

minute at max

speed

The result of the calibration process in LBS or Kg per minut

is shown here. This value represents the maximum material

dispensed per minute. Available in open loop mode.

Weight per

revolution of

conveyor

The result of the calibration process in LBS or Kg per

revolution is shown here. Available in closed loop mode.

Selection of

Liquic control

mode

Allows the selection of one of five control modes:

“Manual”, “12V triggered”, “Ground speed triggered”,

“Open Loop”, “Closed loop”, “Fixed

”

and “Anti-ice”. See

page 3 for a more in-depth description of operation.

• Toggle the power on and off to accept the control mode

change

Liquid auto

nulling

Used to automatically set the minimum and maximum valve

settings of the liquid pump. Available in closed-loop mode.

Liquid

calibration

Material calibrations. See

“

Calibration procedure“ on page 1

Pulses per

liquid volume

The result of the calibration process gallons or litres per

revolution is shown here. Available in closed-loop and anti-ice

mode.

Blast Alarm

seconds

This parameter set the time allowed

in Blast mode before an

alarm sounds. 0 = disabled 0-300 seconds, default = 15

seconds.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

Comentários a estes Manuais

Sem comentários

Bosch 430 Especificações Página 9

Comentários a estes Manuais

Manuais e produtos relacionados com Software Bosch 430