Bosch VG4-100 Series Manual de Instalação descarregar pdf (Página 95)

VG4 Modular Camera Series Cable and Wire Standards | en 95

Bosch Security Systems, Inc. Installation Manual F.01U.162.025 | 6.0 | 2010.03

Audio Connections

1. Remove the 100 ohm termination resistor from the Biphase terminals.

2. Connect the audio line level source to the Biphase C+ input terminal.

3. Connect the audio signal ground to the Biphase C- input terminal.

The following figure illustrates the connections for audio over an IP network

Figure 5.10 Connections for audio over an Ethernet network

1 C- (Biphase) 7 AutoDome Data In/Out

2 C+ (Biphase) 8 P105/P106 Connector

3 Earth Ground 9 Audio Out

4RxD

5 TxD

6Signal Ground

NOTICE! See the AutoDome Modular Camera System User Manual for configuring and using

audio over an IP Ethernet network.

1 2 ... 90 91 92 93 94 95 96 97 98 99 100 ... 107 108

Sem comentários

Bosch VG4-100 Series Manual de Instalação Página 95