Bosch VG4-100 Series Manual de Instalação descarregar pdf (Página 56)

56 en | Installing Roof Parapet and Pipe Mounts VG4 Modular Camera Series

F.01U.162.025 | 6.0 | 2010.03 Installation Manual Bosch Security Systems, Inc.

3. Attach pipe (not supplied) to the Top-mounting Flange.

4. Route the power, video, control, and alarm wires through the Top-Mounting Flange and

down the pipe.

5. Wrap at least five layers of Teflon tape around the threads.

6. Apply the supplied thread sealant to the threads on the Pipe.

– Make sure all surfaces are clean and dry.

– Apply a bead of sealant completely around the leading threads of the male fitting.

– Force the adhesive into the threads to thoroughly fill all voids.

7. Thread the Pipe Cap onto the down pipe and tighten securely to prevent leaks. See

Figure 3.9, Page 55.

WARNING!

You must thread the pipe onto the Top-mounting Flange until it is tight. Failure to do so can

result in damage, serious injury or death.

WARNING!

You must thread the Dome Cap onto the pipe until it is tight. Failure to do so can result in

damage or serious injury or death.

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 107 108

Sem comentários

Bosch VG4-100 Series Manual de Instalação Página 56