Bosch SE2005 Guia de Configuração descarregar pdf (Página 31)

Security Escort | Installation and Setup Guide |3.0

Installation Instructions

EN | 31

Bosch Security Systems | 1/09 | 33831E

Figure 8: AE1 Enclosure

1 - Flip-up view to show retainer tabs

2 - Hole for lock and key assembly

3 - Place tamper switch here. Use the

three longer screws to secure.

4 - Wire entrance (6)

5 - Inside of AE1 enclosure

3.3.2 AE3 Large Indoor Enclosure

The AE3 Large Indoor Enclosure houses

the transponder. It is suitable only

for indoor installation. See Section

1.7.2 AE3, Large Indoor Enclosure for

specifications.

Mount the enclosure in a secure

location away from excessive heat and

moisture.

Figure 9: AE3 Enclosure

1 - View to show retainer tabs.

2 - Tamper switch mounts here.

3.3.3 AE100 Indoor Enclosure

The AE100 Indoor Enclosure houses the

Receiver. It is suitable only for

indoor installation. See Section

1.7.3

AE100 Indoor Enclosure for

specifications. Use the security hex

driver to secure the face of the

enclosure to the body.

Note:

Refer to the EA102 Installation

Instructions and Site Survey for

specifications and methods for

achieving optimum receiver

placement.

When mounting the enclosure to a pre-

wired electrical box, make sure that

the electrical box has a 15 cm (6 in.)

overhead clearance. The enclosure

should be mounted as shown in

Figure

11.

Figure 10: AE100 Enclosure

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 53 54

Comentários a estes Manuais

Sem comentários

Bosch SE2005 Guia de Configuração Página 31

Comentários a estes Manuais

Manuais e produtos relacionados com Sistemas de segurança - controlo de acesso Bosch SE2005