Bosch DS7447 Guia do Utilizador descarregar pdf (Página 44)

– 44 –

The Master Keypad - DS7447/DS7447E only

General Information

Your system may include a Master keypad. A Master keypad is a DS7447/DS7447E keypad programmed to give a user access to all the

partitions he has access to, not just the partition in which the Master keypad is located. This is different from a Standard keypad in that

Standard keypads only give access to the single partition in which they are located. Commands entered at the Master keypad will affect all

the partitions to which the user has access. If this is not desirable, the Master keypad can also be used to control each partition individually;

this is called Single Partition Mode. Single Partition Mode allows a user to control any or all of the partitions he has access to on an

individual (one by one) basis (see page 44 for more information on Single Partition Mode).

Note: In order to use the Master keypad, your PIN must be assigned to the partition in which the Master keypad is located.

Master Keypad Displays (also see the following page)

Master keypad displays will differ slightly from Standard keypads. The Master keypad display will scroll the Status of each partition, followed

by the partition number. For example, if all partitions are armed, the Master keypad will scroll through the following displays:

If only partitions 1, 2, 3, 4, 6, and 8 are armed, the Master keypad will scroll through the following displays:

Displays for partitions that are Not Ready will display in the same manner.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 59 60

Sem comentários

Bosch DS7447 Guia do Utilizador Página 44