Bosch APC-AMC2-4WCF Manual de Instalação descarregar pdf (Página 51)

AMC2 4W Operating | en 51

Bosch Security Systems Installation manual F.01U.024.965 | V.4 | 2006.09

Fig. 6.2 Restarting the AMC2 4W with the provided screw driver

6.3.2 Resetting the Network Configurations

1. Reset the AMC2 4W as described above (in download pro-

gram).

2. Open the upper case of the AMC2 4W as described in

Section 5.3 Opening the AMC2 4W Case.

3. Set all six DIL switches of the RS-485 selector to ON

4. Press the tamper switch on the upper left side of the board

The AMC2 4W will now have the following network configura-

tion:

• DHCP = 0

• IP = 127.0.0.1

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 59 60

Sem comentários

Bosch APC-AMC2-4WCF Manual de Instalação Página 51