Bosch PIC6..E1.. Guia de Instalação descarregar pdf (Página 18)

2 / INSTALLING YOUR APPLIANCEEN

Note

— Before installation, please ensure

the area is clean to avoid suction of the

remaining bits of broken wood and dust.

— It cannot share the same air ventilation

tube with other appliance such as gas tube,

warmer tube, and hot wind tube.

— The bending of ventilation tube should

be ≤ 120°, parallel or above the start point

and should be connected to the external

wall.

— After installation, make sure that the

extractor is level to avoid grease collection

at one end. See Pic 10.

— 4pcs ST4*8 big  at screws will be used to

install the outlet, see pic 5.

— Adjust the 4 glass screws to check

whether the glass and the cooker hood

body connected well and  xed, see pic 6.

— Hold up the hood, 16pcs M4*10 big  at

screws will be used to connect the hood

body into angle iron, see pic 7.

— Put the extensible pipe on the outlet;

after ensure all the things ok, put down the

hook, take from the external chimney, all the

installation is  nished, see pic 9.

Pic 10

Pic 5

Pic 6

Pic 7

Pic 8

Pic 9

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 143 144

Sem comentários

Bosch PIC6..E1.. Guia de Instalação Página 18