Bosch PXY801DW4E Manual de Instruções descarregar pdf (Página 26)

en Cooking assist functions

Setting the boiling point

The point at which water starts to boil depends on the

height of your home above sea level. You can set the

boiling point if water is boiling too strongly or not

strongly enough. To do this, proceed as follows:

■ Select the basic setting ™…; see the section on

~ "Basic settings"

■ The basic setting is 3 as standard. If your home is

between 200 and 400 metres above sea level, there

is no need to set the boiling point. If not, choose the

correct setting from the following table according to

your altitude:

Note: Temperature setting 3/100 ºC is sufficient for

efficient boiling, even if the water does not boil very

strongly. However, the boiling point can be changed.

For example, you can set a lower altitude if you want the

water to boil more strongly.

Setting procedure

You will need to connect the wireless cooking sensor to

the control panel before using the cooking functions for

the first time. Refer to the section entitled ~ "‚

Wireless temperature sensor" to find out how to do this

1. Attach the temperature sensor to the saucepan; see

the section on ~ "Preparing and maintaining the

wireless temperature sensor"

2. Place a saucepan filled with sufficient liquid on the

required hotplate and always put the lid on.

3. Select the hotplate on which you have placed the

saucepan with the temperature sensor.

4. Touch the å symbol on the temperature sensor.

The indicator å will light up in the control panel.

5. Select the right temperature setting from the table.

The function has now been activated.

The temperature symbol å will flash until the water

or oil has reached the right temperature for adding

the food. A signal will sound and the temperature

symbol will stop flashing.

6. Once the signal has sounded, take the lid off and

add the food. Keep the lid on during cooking.

Note: Do not cover the pan when using the "Frying

with a large amount of oil in the saucepan" function.

Switching off cooking functions

Select the hotplate and set it to ‹ .‹ on the control

panel. The hotplate will switch off and the residual heat

indicator will appear.

Note: To re-activate the cooking functions, wait for

approximately 10 seconds.

Height

Setting ™…

0 - 100 m.

‚

100 - 200 m.

200 - 400 m.

„*

400 - 600 m.

…

600 - 800 m.

†

800 - 1000 m.

‡

1000 - 1200 m.

1200 - 1400 m.

‰

Above 1400 m.

* Basic setting

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 51 52

Comentários a estes Manuais

Sem comentários

Bosch PXY801DW4E Manual de Instruções Página 26

Comentários a estes Manuais

Manuais e produtos relacionados com Fogões Bosch PXY801DW4E