Bosch TOURING 7500 SERIES Manual do Operador descarregar pdf (Página 88)

You configure the monitors in an analog monitor group logically in rows and columns. This

arrangement does not have to meet the physical arrangement of the monitors.

To configure an analog monitor group:

1. In the Name: field, type a name for the analog monitor group.

2. In the Columns: and Rows: fields, enter the desired values.

3. Drag each available decoder to an analog monitor image on the right.

The logical number of the decoder is displayed as a black number on the monitor image

and the color of this image changes.

If no decoder is available, unassign a decoder from another analog monitor group or

repeat network scan.

4. Click the Advanced Configuration tab.

5. Change the logical numbers of the assigned decoders as required. If you enter an already

used number, a message box is displayed.

6. Click Quad View to enable quad view for this decoder.

Note:

We do not recommend configuring quad view for H.264 cameras.

7. In the Initial Camera column, select the desired camera.

8. In the OSD related columns, select the desired options.

Adding a monitor wall

Main window > Devices > Right-click > Click Add Monitor Wall

Main window > Maps and Structure

After having added the monitor wall, the user of Operator Client can control this monitor wall.

The user can change the monitor layout and assign encoders to monitors.

To add:

1. Select the desired decoder.

2. If required, enter the maximum number of monitors and configure thumbnails.

3. Click

4. Click Maps and Structure.

5. Drag the monitor wall to the Logical Tree.

6. If required, configure the access to the monitor wall with corresponding user group

permissions.

Sem comentários

Bosch TOURING 7500 SERIES Manual do Operador Página 88