Bosch TOURING 7500 SERIES Manual do Operador descarregar pdf (Página 79)

Assigning NVRs to Failover NVRs

Main window >

Devices > Expand > Expand

Main window > Devices > Expand > Expand

For an NVR, you can configure a Failover NVR that takes over the tasks of the NVR if it fails.

Ensure that an NVR is switched to a Failover NVR.

You can easily configure several NVRs to have a Failover NVR assigned.

To assign an NVR to a Failover NVR:

1. Expand

2. Select an NVR as required.

3. Click the Global Settings tab.

4. In the Failover NVR list, select the required Failover NVR.

To assign multiple NVRs to a Failover NVR:

1. Expand

2. Select the desired Failover NVR.

3. Click the Assigned NVRs tab.

4. In the Time [h] column, select the required NVRs.

5. Click Add NVR.

Each added Primary NVR has the selected Failover NVR assigned.

Assigning NVRs to a Redundant NVR

Main window >

Devices > Expand > Expand

You can only assign one NVR to a Redundant NVR. If you select a Primary NVR that already has

been assigned to another Redundant NVR, the assignment to the previous Redundant NVR is

removed.

Ensure that an NVR is switched to a Redundant NVR.

To assign a Primary NVR to a Redundant NVR:

1. Select the desired Redundant NVR.

2. Click the Assigned NVR tab.

The table displays all Primary NVRs.

3. In the first column, click to check the desired NVR.

Each checked primary NVR has the selected Redundant NVR assigned.

4. In the Backup column, make the desired setting.

When cleared, the Camera Storage tab becomes active.

Displaying information on an NVR

Main window > Devices > Expand > Expand >

12.2.6

12.2.7

12.2.8

Bosch Video Management System Managing NVRs | en 79

Bosch Sicherheitssysteme GmbH Configuration Manual 2013.07 | V1 | Configuration Client

1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 259 260

Sem comentários

Bosch TOURING 7500 SERIES Manual do Operador Página 79