Bosch KGF Series Especificações descarregar pdf (Página 41)

Chapter

6.

In

the

Event

of

Suspected

Failure

1.

Error Detection (Alarming) Operation

Should any malfunction occur in your autoclave, the incorporated error detection circuit is

triggered to assure your safety. Once the circuit is activated, the error number appears on

the

digital display, and further the electronic

alarm

sounds, indicating the occurrence of an abnormal

condition. To

stop the

alarm

sound, press

the

STARTISTOP

switch.

If

an

alarm

is given,

check

the error numberhnd turn off the

switch.

-

Error Number

(Lack-of-water alarm)

(Temperature sensor wire

breakage)

Er-3

(Over temperature)

:Over-cool alarm)

ErS

:Over-pressure alarm)

Lid open alarm)

Er-1

.4utomatic exhaust valve troubl~

~larrn)

Er-9

Sterilization heater trouble

~larm)

€

f-

'L

Open/close lever locking failurc

~larm)

ErE

Exhaust bottle anomaly alarm)

Description of Abnormal Condition

Piping is clogged by a bag such as the wast

disposal bag.

Temperature in the working chamber falls

below the freezing point.

Disconnection of temperature sensor for

control

Temperature in the working chamber

exceeds the upper limit of the working

temperature range

+3OC.

A temperature +5OC or above the set

temperature continues for 10 seconds

during sterilization.

A temperature +lO°C or above the set

temperature continues for

15

minutes

during

warming.

A

temperature of 102OC or below continued

for 10 seconds during sterilization.

A

pressure of the saturated steam pressure at

a

set

temperature

+

0.2 kgf/cm2 or above

continued

in

the working chamber for 15

seconds.

Piping is clogged by

a

bag such

as

the

waste disposal bag.

The opedclose lever was moved to the

open side during operation.

The automatic exhaust valve continued

closing operation for

10

seconds.

Temperature in the working chamber has

not reached a set sterilization temperature

when

4

hours passed after the start-up of

operation.

*

The openfclose lever is unlocked during

operation.

*

The exhaust bottle got out of place during

operation.

Whenever a bag, such as a waste

disposal bag, is used for sterilization,

put it

in

the wire mesh basket and

place the basket in the working

chamber.

Contact us or the authorized sales

outlet from which you

purchased the

product, or our service cemter.

1

Reduce the quantity of a substance to

be sterilized, and repeat operation

from the beginning. If this error

reoccurs after all measures have been

[&en, contact

the authorized sales

outlet from which you purchased the

product.

Contact the authorized sales outlet

from which you purchased the product,

or our service cemter.

Remedy

Check to

see

that pressure

is

at

0

kgf/cm2, and then open the lid. After

the heater

has

been cooled. pour in

a

sufficient quantity of water, and repeat

operation from the beginning

Whenever a bag, such

as

a waste

disposal bag, is used for srerilizntion.

put it in the wire mesh basket and

place the basket in the working

c

harnber.

Adjust room temperature at the

installation site to

5

-

35OC.

Contact the authorized sales outlet

from which you purchased the product,

or our service cemter.

Push the exhaust bottle into the

housing area as far as it will go. and

then repeat operation from the

beginning.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46

Comentários a estes Manuais

Sem comentários