Bosch NTC-265-PI Manual de Instalação descarregar pdf (Página 19)

IP Camera 200 Series Installation | en 19

Bosch Security Systems Installation Manual AM18-Q0610 | v1 | 2012.02

3.7.1 Camera positioning

The camera position can be adjusted along three axes. When

adjusting ensure that the picture display on the monitor is level.

Set the camera to the desired position using the supplied Torx

screwdriver:

1. For vertical adjustment (1), loosen the locking screw and

move the camera housing to the desired angle. Tighten the

screw.

2. For horizontal adjustment (2), loosen the locking screw

and rotate the camera housing around the base. Tighten

the screw.

3. To obtain a horizontal horizon (3), rotate the camera body

as necessary to align the picture shown on the monitor.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 27 28

Sem comentários

Bosch NTC-265-PI Manual de Instalação Página 19