Bosch LTC 0465 Series Manual de Serviço descarregar pdf (Página 16)

16 en | Connections Dinion Day/Night Camera

F.01U.163.823 | v1.0 | 2010.01 Installation and Operation manual Bosch Security Systems

3.4 Lens mounting

The camera accepts CS-mount lenses. C-mount lenses can be

mounted using a lens adapter ring. DC-iris lenses are

recommended for the best picture performance. The camera

automatically detects the type of lens used and optimizes

performance accordingly. A spare male lens connector is

provided.

Note

If a short circuit is detected on the lens connector, the on-

screen display (OSD) failure message LENS SHORT CIRCUIT is

shown. The lens circuit is automatically disabled to avoid

internal damage. Remove the lens connector and check the pin

connections.

CAUTION!

To avoid damaging the CCD sensor when using a C-mount lens,

make sure a lens adapter ring (not included) is mounted onto

the camera before mounting the lens.

Lenses weighing more than 0.5 kg (1.1lbs) must be separately

supported.

Figure 3.5 Mounting a lens

Figure 3.6 Lens connector

Bosch

Pin Video iris lens DC iris lens

1 Supply (11.5V ±0.5, 50mA max.) Damp -

2Not used Damp +

3 Video signal 1Vpp 1kOhm Drive +

4 Ground Drive -

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 39 40

Sem comentários

Bosch LTC 0465 Series Manual de Serviço Página 16