
- 16 -
This chart explains the procedure for turning ON and turning OFF Chime Mode.
Chime Mode causes the keypad sounders to beep each time a Perimeter or Entry/Exit zone is violated
while the control panel is off (disarmed). The [#] [7] command is used to turn Chime Mode both off and on.
This will only activate or de-activate the keypad(s) in the partition you are entering from.
If this is performed from a Master keypad, you must be in Single Partition Mode.
Chime Mode
What will Happen
Command
Sequence
[PIN] + [#] [7]
[PIN] + [#] [7]
Action Desired
The ke
pad sounders will beep for two seconds
each time a Perimeter or Entr
/Exit zone is violated.
The DS7447 displa
will read
“Chime Mode On”
for 5 seconds.
The DS7447 displa
will read
“Chime Mode Off”
for 5 seconds.
Turn ON
Chime Mode
Turn OFF
Chime Mode
Comentários a estes Manuais