Bosch RFRC-OPT Especificações

RADION receiver OPRFRC-OPT en Reference Guide

RADION receiver OPRADION receiver OP is a wireless receiver that connects RADION wireless peripherals tosupported Bosch option bus control panels via

– As a consumer, you are legally obliged to take batteries to a suitable collection point.– You can return used batteries free of charge to the point

Figure 3.1: Address switch set to 1Option Bus address settingsDepending on the supporting control panel, use the following table as a reference whense

Notice!Do not install long cable runs next to high-current power feeds. Keep cable lengths as shortas possible to minimize noise pickup.Ensure that th

The preferred method of entering in the RFID number would be to enter it in manually via thekeypad – point source/RFID, or remote programming software

MaintenanceAt least once a year, a walk test should be performed to verify the range and coverage forproper operation.Magnet walk testPerform a magnet

Communication error state:The receiver enters a communication error state when, during power up, it does not establisha link with the control panel, o

Relative Humidity Up to 93% non-condensingFrequency 433.42 MHzWiring Distance Maximum distance of 300 m (1000 ft) fromthe control panelWiring Gauge 0.

RADION Device Battery Size Battery Type Cell Voltage Quantity(Cells)RFKF-TB key fobRFKF-FB-key fobCR2032 (coincell)Lithium 3 VDC 1RFPB-SB- panicbutton

RADION repeaterThe RFRP is a combined receiver and transmission device that improves the overalltransmission, communication, and reliability capabilit

SpecificationsDimensions 139.70 mm x 209.60 mm x 31.80 mm(5.50 in x 8.25 in x 1.25 in)Power/Voltage(Standby battery)16.5 VAC, 40VA (~)Rated 3.7 VDC, 3

RADION glassbreakThe RFGB is a wireless transmitter used for detecting breaking glass. Throughout thisdocument, the term “glassbreak” refers to glass

– For armor-coated glass installations, mount the sensor no more than 12 ft (3.65 m) fromthe glass– Mount the detector in the direct line of sight of

Notice!If blinds or drapes are present, test the area by holding the hand-held tester behind theclosed blinds or drapes.Sensor testThe sensor must be

The specified range of the sensor has been established for worst-case conditions. While thesensor will likely function at additional range, it may mis

RADION TriTechThe RFDL-11 is a motion detector which uses artificial intelligence to detect motion andprovide immunity to false alarms. An integral RF

2.1 m (7.0 ft) -9ﾟ -6ﾟ2.4 m (8.0 ft) -10ﾟ -7ﾟNotice!The mounting height must be 2 m (6.5 ft) and the vertical angle must be set at -5ﾟ forinstallation

LED Condition CauseFlashing blue Warm-up period after power-upNo LED upon initial power up PIR failure. Replace unit.Walking Testing the system1. Star

RADION PIRThe RFPR-12 is a high performance PIR motion detector that uses advanced signal processing.An integrated wireless transmitter sends a batter

Notice!In the normal operating mode, an alarm can be transmitted only after three (3) minutes havepassed since the previous alarm restoral. This 3 min

Table of contents1Introduction 51.1 About documentation 51.2 Bosch Security Systems, Inc. product manufacturing dates 52General installation 72.1 Inst

RADION PIR CThe RFPR-C12 is a high performance curtain PIR motion detector that uses advanced signalprocessing to provide outstanding catch performanc

Notice!In the normal operating mode, an alarm can be transmitted only after three (3) minutes havepassed since the previous alarm restoral. This 3 min

RADION smokeThe RFSM is a non-latching wireless smoke detector that sends an alarm signal to the receiver.The following features include:– A visual st

1 ￚ High intensity LED2 ￚ Test/Silence buttonBattery replacementUnder normal conditions, the LED normally flashes every 8 sec to indicate normal opera

Test/Silence buttonRefer to the RADION smoke detector illustration for location of the Test/Silence button.– Testing. Press the Test/Silence button fo

123Figure 9.3: Remove the detector cap1 ￚ Optical base2 ￚ Optical chamber3 ￚ Alarm cap5. Use compressed air or a soft-bristled brush to remove dust an

RADION contact SMThe RFDW-SM is a standard surface-mount wireless transmitter device used for monitoringdoors and windows.Features include:– An intern

– When installing the magnet, verify that the notches in the magnet base, line up with thenotches in the transmitter base, otherwise the magnet and tr

RADION contact RMThe RFDW-RM is a recessed-mounted wireless transmitter device used for monitoring doorsand windows. Features include:– Self-contained

How to read the Graphical Magnet Distances tableContained in the recessed door/window contact Installation Guide is a graphical table alongwith the X

9RADION smoke 329.1 Battery replacement 339.2 Smoke test 339.3 Sensitivity test 339.4 Test/Silence button 349.5 LED 349.6 Clean the detector and repla

RADION specialtyRFBT is a designed transmitter (bill trap) specifically used in financial or retail environments.It transmits a silent, wireless alarm

bank vault at the close of each business day. In this scenario, the bank vault system is alwaysarmed, and the bill trap remains in a non-faulted condi

RADION universal transmitterThe RFUN is a wireless transmitter used for monitoring doors, windows, and other dry contactdevices.Features include:– A c

4 ￚ 2.2 k Ω tamper EOL5 ￚ Input disabled – no contact, 2.2 k Ω EOL Installation considerationsYou have a variety of installation options to consider w

Callout ￚ Description1 ￚ No jumper disables the internal reed switch2 ￚ Jumper on enables the internal reed switch 44 en | RADION universal transmitte

RADION keyfobRADION keyfobs (two button and four button) are personal transmitters carried by the userthat allow the user to remotely arm or disarm a

– Panic alarm– LED indicator– Programmable option buttonsFigure 14.1: Keyfob buttons and LED1 ￚ Arm button2 ￚ LED3 ￚ Disarm button4 ￚ Programmable but

Figure 14.2: Keyfob buttons and LED1 ￚ Arm button2 ￚ LED3 ￚ Disarm buttonRADION receiver OP RADION keyfob | en 47Bosch Security Systems, Inc Reference

RADION panicThe RFPB-SB/RFPB-TB is a transmitter that sends a panic alarm signal to the security systemwhen one (single button panic), or both panic b

LED RedFrequency 433.42 MHzTable 15.1: SpecificationsNotice!Please note, the battery does not come installed. Verify that the correct battery as defin

IntroductionThis document contains the basic information that a trained installer needs to install theRADION system. It supplements the documents list

AppendicesIcons and symbolsUse the table below for descriptions of the icons and symbols used in the reference guide.Description Icon/symbolNot pet fr

Electrostatic discharge symbolSymbol against disposing batteries intothe garbageHumidity rangeTemperature rangeFrequency rangeDuration of timeQuestion

Battery-related information.Perform a walk testWalk test has concludedDevice has wall tamper detection.52 en | Appendices RADION receiver OP02.2014 |

Bosch Security Systems, Inc.130 Perinton ParkwayFairport, NY 14450USAwww.boschsecurity.com© Bosch Security Systems, Inc., 2014

6 en | Introduction RADION receiver OP02.2014 | 01 | F.01U.261.835 Reference Guide Bosch Security Systems, Inc

General installationPhases of installationThe installation of the RADION system is achieved by following the sequential process asdefined in this chap

Unpacking informationWhen unpacking the receiver, repeater, or bill trap device, it is important to remove thecardboard insert as illustrated below;Fi

To ensure proper operation of the RADION devices, test the basic functionality of the devicelocally. Depending on the RADION device to be tested, perf