Bosch PIL975N14E Manual de Instruções descarregar pdf (Página 10)

Automatic timer

With this function you may select a cooking time for all

hotplates. Once a hotplate is switched on, the selected time will

begin to count down. The hotplate will automatically switch off

when the cooking time has elapsed.

Instructions on activating the timer are found in the chapter

entitled "Basic settings".

Note: The cooking time can be changed or cancelled for any

hotplate:

Press the

0 symbol several times until the $ indicator of the

required hotplate lights up. Adjust the cooking time with

symbols 1 to 9 or deactivate with the symbol 0.

The timer

The timer can be set for periods of up to 99 minutes. It is

independent of the other settings. This function does not

automatically switch off a hotplate.

How to program

1.Press the 0 symbol. The indicator U lights up. ‹‹ lights up

in the time program function display.

2.Set the required time using symbols 1 to 9.

The time starts again after a few seconds.

Once the time has elapsed

Once the time has elapsed, a beep will sound.

‹‹ and Uare

displayed in the time program function display. After pressing

the

0 symbol, the indications turn off.

Changing or cancelling the time

Press the

0 symbol, the U indicator lights up.

Change the time using the 1 to 9 symbols or press 0 to cancel.

Cleaning lock function

Cleaning the control panel while the hob is on may change the

settings.

In order to avoid this, the hob has a cleaning lock function.

Press the

>D symbol. A signal sounds. The control panel is

locked for 35 seconds. The surface of the control panel can

now be cleaned without risk of changing the settings.

Note: The lock does not affect the main switch. The hob may

be switched off when desired.

Automatic time limitation

If the hotplate remains in use for a long time and no changes

are made in the settings, the automatic time limitation function

is triggered.

The hotplate stops heating. The ”‰ symbol and the residual

heat indicator

œ/• flash alternatively in the display.

The indicator goes out when any symbol is pressed. The

hotplate can now be reset.

When the automatic time function is used, it is governed by the

selected power level (from 1 to 10 hours).

Basic settings

The device has several basic settings. These settings may be

adapted to the user's individual needs.

Indicator Function

™‚

Childproof lock

‹ Deactivated.*

‚ Activated.

™ƒ

Sound signals

‹ Confirmation beep and error signal deactivated.

‚ Only confirmation beep deactivated.

ƒ All signals activated.*

™†

Automatic timer

‹ Switched off.*

‚-ŠŠ Automatic shut-off time.

™‡

Duration of the time program function warning signal

‚ 10 seconds*.

ƒ 30 seconds.

„ 1 minute.

*Factory settings

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16

Comentários a estes Manuais

Sem comentários

Bosch PIL975N14E Manual de Instruções Página 10

Comentários a estes Manuais

Manuais e produtos relacionados com Fogões Bosch PIL975N14E