Bosch DIVAR AN 3000 Guia de Instalação descarregar pdf (Página 21)

Network settings page

You configure the network settings of the operating system.

As soon as you click Next button, the settings are activated.

If you have changed any setting on this page, click Reboot to

restart the system.

Notice!

If a DHCP server is employed in the network for the dynamic

assignment of IP addresses, activate acceptance of IP

addresses automatically assigned to the device.

Certain applications (VRM, Bosch Video Management System,

Bosch Video Client, Configuration Manager) use the IP address

for the unique assignment of the device. If using these

applications, the DHCP server must support the fixed

assignment between IP address and MAC address, and must be

appropriately set up so that, once an IP address is assigned, it

is retained each time the system is rebooted.

DIVAR IP 3000 System setup - first steps | en 21

Bosch Sicherheitssysteme GmbH 2013.09 | V4 | DOC

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 43 44

Sem comentários

Bosch DIVAR AN 3000 Guia de Instalação Página 21